| 3M 9472 or equivalent Non-Conductive Pressure Sensitive Adhesive | |
| PRESSURE-SENSITIVE ADHESIVE PROPERTIES | |
| Service Temperature Range |
-20° F to + 150° F (-29° C to + 66° C); PSA will operate for limited time at 200° F (93° C); high temperature limit = 250° F (121° C) |
| Shelf Life Conditions | One year at 158° F (70° C)/50% RH |
| Application Temperature Range | 40° F to 150° F (4° C to 66° C) |
| 3M 9703/9713 or equivalent Conductive Pressure Sensitive Adhesive | |
| PRESSURE-SENSITIVE ADHESIVE PROPERTIES | |
| Adhesive |
.002” acrylic adhesive transfer tape with silver-plated conductive particles |
| Liner | .0035” silicone treated low release paper liner |
| Release Value | 15 gram/inch width |
| Adhesion |
40 ounce/inch width to stainless steel after 1 hour @ room temperature |
| Resistance | 0.01 ohm/square inch, maximum |
| Service Temperature Range |
30° F to + 225° F (34° C to + 107° C); PSA will operate for limited time at 248° F (120° C); high temperature limit = 158° F (70° C) |
| Shelf Life Conditions | 1 year at Room Temperature and 50% RH |
| Application Temperature Range | 40° F to 150° F (4° C to 66° C) |
Recommended Design
Compression/Deflection = 5%-10% of original height for sheets and rectangle strips.
Compression/Deflection = 15%-20% of original height for solid O, D, and P strips.
Compression/Deflection = 20%-30% of original height for thin wall tubing.
PSA is available on any extrusion with a minimum .125” mating surface.